USB Cables

• Lot of 5 USB 2.0, A Male to Micro B Male, 1m long cables
• Fabric Colours: Blue, Yellow, Deep Pink, Orange and Black
• Suits devices that get charged or powered with Micro USB cables, such as: Raspberry Pi, Samsung Galaxy Tab 3 7.0, Samsung Galaxy S5, Samsung Galaxy S4 i9500, Samsung Galaxy SIII 4G i9305, Samsung Galaxy Tab 3 10.1, Samsung Galaxy SII i9100, Samsung Galaxy Note 3, Samsung Galaxy S4 Mini-Telstra, Samsung Galaxy Express, Samsung Galaxy SII 4G,Samsung Galaxy Note 8.0, Samsung Galaxy S4 Mini-Optus, Samsung Galaxy SIII i9300, Samsung Galaxy S4 Active, Samsung Galaxy Mega, Samsung Galaxy Tab 3 8.0.

• Lot of 5 USB 2.0, A Male to Micro B Male, 1m long cables
• Colours: Purple, Green, Pink, Red and White
• Suits devices that get charged or powered with Micro USB cables, such as: Raspberry Pi, Samsung Galaxy Tab 3 7.0, Samsung Galaxy S5, Samsung Galaxy S4 i9500, Samsung Galaxy SIII 4G i9305, Samsung Galaxy Tab 3 10.1, Samsung Galaxy SII i9100, Samsung Galaxy Note 3, Samsung Galaxy S4 Mini-Telstra, Samsung Galaxy Express, Samsung Galaxy SII 4G,Samsung Galaxy Note 8.0, Samsung Galaxy S4 Mini-Optus, Samsung Galaxy SIII i9300, Samsung Galaxy S4 Active, Samsung Galaxy Mega, Samsung Galaxy Tab 3 8.0.

• Lot of 9 USB 2.0, A Male to Micro B Male, 1m long cables
• Colours: Yellow, Green, Purple, Orange, Blue, Pink, Red, White, Black
• Suits devices that get charged or powered with Micro USB cables, such as: Raspberry Pi, Samsung Galaxy Tab 3 7.0, Samsung Galaxy S5, Samsung Galaxy S4 i9500, Samsung Galaxy SIII 4G i9305, Samsung Galaxy Tab 3 10.1, Samsung Galaxy SII i9100, Samsung Galaxy Note 3, Samsung Galaxy S4 Mini-Telstra, Samsung Galaxy Express, Samsung Galaxy SII 4G,Samsung Galaxy Note 8.0, Samsung Galaxy S4 Mini-Optus, Samsung Galaxy SIII i9300, Samsung Galaxy S4 Active, Samsung Galaxy Mega, Samsung Galaxy Tab 3 8.0.

Feed other USB devices from the Raspb erry Pi GPIO header pins. Including other Raspberry Pi. If you want to use a single USB power adapter to feed the Raspberry Pi as well as other devices, this is a solution for you. Just connect the red cable to to pin 2 of the Raspberry Pi GPIO header (5Vdc) and the black cable to pin 6 of the GPIO header (GND).

BEWARE if you make the wrong connections you could cause a short circuit and you could end up damaging your Pi and other devices connected to it, including the power supply!

Look at the images in the product details that show how to make the connection properly.

If you have a power hungry USB device that a single USB port can not feed this is the solution for you.

Connect your power hungry device (i.e. an external 2.5" hard drive) to the female USB Type A connector. Then connect the 2 USB Type A male connectors to 2 different USB ports.

The thick Type A male cable provides power and data from one USB port. The thin Type A male cable provides power only from another USB port.

• USB 3.0 Cable, A to A, high speed, 1m
• Connector Type A: USB 3.0 A Plug (Male)
• Connector Type B: USB 3.0 A Plug (Male)
• Cable Length: 2m

• USB 3.0 Cable, A to A, high speed, 2m
• Connector Type A: USB 3.0 A Plug (Male)
• Connector Type B: USB 3.0 A Plug (Male)
• Cable Length: 2m

• USB 2.0 Cable, A Male  to A Female, 0.25m
• Connector Type A: USB 2.0 A Plug (Male)
• Connector Type B: USB 2.0 A Socket (Female)
• Cable Length: 0.25m
• Can be used as a USB extension, or to connect USB devices that would not fit in the USB connectors of your equipment.

• USB 2.0 Cable, A Male  to A Female, 1.8m
• Connector Type A: USB 2.0 A Plug (Male)
• Connector Type B: USB 2.0 A Socket (Female)
• Cable Length: 1.8m
• Can be used as a USB extension

• USB 2.0 Cable, A Male  to A Female, 1m
• Connector Type A: USB 2.0 A Plug (Male)
• Connector Type B: USB 2.0 A Socket (Female)
• Cable Length: 1m
• Can be used as a USB extension

• USB 2.0 Cable, A Male to A Male, 1m
• Connector Type A: USB 2.0 A Plug (Male)
• Connector Type B: USB 2.0 A Plug (Male)
• Cable Length: 1m

• USB 2.0 Cable, A Male to A Male, 2m
• Connector Type A: USB 2.0 A Plug (Male)
• Connector Type B: USB 2.0 A Plug (Male)
• Cable Length: 2m

• USB 2.0 Cable, A Male  to A Male, 2m
• Connector Type A: USB 2.0 A Plug (Male)
• Connector Type B: USB 2.0 A Plug (Male)
• Cable Length: 2m

• USB 2.0 Cable, A Male to A Male, 2m
• Connector Type A: USB 2.0 A Plug (Male)
• Connector Type B: USB 2.0 A Plug (Male)
• Cable Length: 2m

• USB 2.0 Cable, A Male to A Male, 3m
• Connector Type A: USB 2.0 A Plug (Male)
• Connector Type B: USB 2.0 A Plug (Male)
• Cable Length: 3m

• USB 2.0 Cable, A Male to A Male, 5m
• Connector Type A: USB 2.0 A Plug (Male)
• Connector Type B: USB 2.0 A Plug (Male)
• Cable Length: 5m

• USB 2.0 Cable, A Male to Micro B Male, 1.8m
• Connector Type A: USB 2.0 A Plug (Male)
• Connector Type B: USB 2.0 Micro B Plug (Male)
• Cable Length: 1.8m
• Suits Raspberry Pi, a few Samsung devices and others. See product details for more information.

• USB 2.0 Cable, A Male to Micro B Male, 1m
• Connector Type A: USB 2.0 A Plug (Male)
• Connector Type B: USB 2.0 Micro B Plug (Male)
• Cable Length: 1m
• Suits Raspberry Pi, a few Samsung devices and others. See product details for more information.

For ODROID-C1 or ODROID-C1+

DC Plug specification : Inner diameter 0.8mm and outer diameter 2.5mm
Cable Length : 800mm approx. (32 inch)

Note that you must check the voltage on the USB power adaptor to be between 4.75V and 5.25V at 1Amp load.
Anything outside this range will make the ODROID-C not to operate properly.